Product Image

DOWNLOAD AN INSTANT CUSTOM QUOTE FOR ANY HAAS MACHINE

GET QUOTE

Workholding

Different Workpieces Require Different Workholding

Sometimes You Need Something Bigger, Something Different, or Additional Support

If the standard workholding just won’t do, then trust us to supply you with what you need – direct from Haas.

HAAS VISE OPTIONS AND CONFIGURATIONS CHART

AIR VISES | HYDRAULIC VISES

LATHE WORKHOLDING
 

  • Chucks
  • Tailstocks
  • Steady Rests

ROTARY WORKHOLDING

 

  • Chucks
  • Collets
  • Collet Closers
  • Alternative Platters
  • Tailstocks

VMC WORKHOLDING
 

  • Hydraulic and Air Vises
  • Manual Vises
  • Hydraulic Ready Systems
  • Alternative platters

HMC WORKHOLDING
 

  • Alternative Pallets
  • Spare Pallets

     
Available on These Machines: :
Available Options: :
Available on These Machines: :
Available on These Machines: :
Part 1: Fundamentals and OD Gripping
In the first of this two-part series, a Haas-certified machinist explores our recommended techniques for cutting/boring lathe soft jaws, and demonstrates the proper way to cut OD gripping jaws.
Part 2: ID Gripping and Adding a Taper
In the second of this two-part series, a Haas certified machinist guides us through more advanced techniques for cutting/boring lathe soft jaws, including ID gripping, re-cutting, and adding a taper to your soft jaws.
chuck installation guide
Follow along as we remove and re-install a 10" power chuck on a Haas ST-30. Then, we review the installation of a collet chuck, and the removal of smaller chucks that can be lifted by hand. Finally, we adjust the runout of a manual chuck on a Haas TL-1 Toolroom Lathe.

Need help finding the right machine?

Build & Price

Let us guide you to your next Haas

Get Started Now