Pocket Mill

   

For the best pricing in your area, contact your local Haas Factory Outlet.

CNC Pocket Mill with 12" x 12" x 15" Travels
  • Full-function, easy-to-use Haas control
  • Standard 40-taper spindle
  • Available 10-pocket tool changer
  • Single- or 3-phase power 

The Haas Pocket Mill is small enough to fit into nearly any pocket of space in your shop, while providing the features and performance of our full-size machines, at a very affordable price. 

It’s the perfect choice for start-up shops, schools, hobbyists, garage machinists, or anyone with limited space and a limited budget.

  • 40 Taper
  • 3 Axis
  • 4k RPM
  • 1 Tool Capacity

HAAS POCKET MILL

DOWNLOAD BROCHURE

HAAS JOURNAL

    Compare Machines
    BUILD & PRICE
    Contact Distributor
    Travels S.A.E METRIC
    X Axis 12.00 in 305 mm
    Y Axis 12.00 in 305 mm
    Z Axis 15.00 in 381 mm
    Spindle Nose to Table (~ max) 19.0 in 483 mm
    Spindle Nose to Table (~ min) 4.0 in 102 mm
    Spindle S.A.E METRIC
    Max Rating 7.5 hp 5.6 kW
    Max Speed 4000 rpm 4000 rpm
    Max Torque 33.0 ft-lbf @ 1200 rpm 45.0 Nm @ 1200 rpm
    Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive
    Taper CT or BT 40 CT or BT 40
    Bearing Lubrication Grease Packed Grease Packed
    Cooling Air Cooled Air Cooled
    Table S.A.E METRIC
    Length 28.0 in 711 mm
    Width 11.2 in 284 mm
    T-Slot Width 0.626 in to 0.630 in 15.60 mm to 16.00 mm
    T-Slot Center Distance 4.33 in 110 mm
    Number of Std T-Slots 3 3
    Max Weight on Table (evenly distributed) 500 lb 227 kg
    Feedrates S.A.E METRIC
    Max Cutting 200 ipm 5.1 m/min
    Rapids on X 200 ipm 5.1 m/min
    Rapids on Y 200 ipm 5.1 m/min
    Rapids on Z 200 ipm 5.1 m/min
    Axis Motors S.A.E METRIC
    Max Thrust X 2000 lbf 8896 N
    Max Thrust Y 2000 lbf 8896 N
    Max Thrust Z 2000 lbf 8896 N
    Tool Changer S.A.E METRIC
    Type Carousel Carousel
    Capacity 10 10
    Max Tool Diameter (full)** 3.5 in 89 mm
    Max Tool Length (from gage line) 12.00 in 305 mm
    Max Tool Weight 12.0 lb 5.4 kg
    Tool-to-Tool (avg) 4.20 s 4.20 s
    Chip-to-Chip (avg) 5.00 s 5.00 s
    General S.A.E METRIC
    Coolant Capacity 20 gal 76 L
    Air Requirements S.A.E METRIC
    Air Required† 4 scfm @ 100 psi 13 L/min @ 6.9 bar
    Electrical Specification S.A.E METRIC
    Spindle Speed 4000 rpm 4000 rpm
    Spindle Power 7.5 hp 5.6 kW
    Input AC Voltage (1 Phase) 220 VAC 220 VAC
    Full Load Amps (1 Phase) 40 A 40 A
    Input AC Voltage (3 Phase) - Low 220 VAC 220 VAC
    Full Load Amps (3 Phase) - Low 25 A 25 A
    Input AC Voltage (3 Phase) - High* 440 VAC 440 VAC
    Full Load Amps (3 Phase) - High* 13 A 13 A
    Dimensions - Shipping S.A.E METRIC
    Domestic Pallet 90.0 in x 80.0 in x 99.0 in 229 cm x 203 cm x 252 cm
    Export Pallet 90.0 in x 80.0 in x 99.0 in 229 cm x 203 cm x 252 cm
    Weight 3960 lb 1796.0 kg
    Weight, Export Crate 3,960 lb 1,796.0 kg

    NOTE: All specifications listed are for the standard machine configuration. Optional equipment may change the machine’s specifications.

    *Haas machines are designed to operate on 220 VAC (200-240 VAC) power. An optional internal high-voltage transformer (380 - 480 VAC) is available for all models, except the Desktop Machines, CL-1, CM-1, and SR Series routers. This optional high-voltage internal transformer is not field installable; it must be ordered with the machine.

    Haas machines destined for Europe and the UK are configured with an internal high-voltage non-isolated transformer to operate on 400 VAC, except the Desktop Machines, CL-1, CM-1, and SR Series routers. 

    **Optional tool changers may have a different max tool size than the standard tool changer. Extra-large tools may require two adjacent pockets empty between tools. Click here for toolholder specifications.

    ATTENTION! Optional high-performance spindles may have a higher power requirement than the standard spindle. However, if the spindle horsepower (kW) does not change, the power requirement remains the same. Verify the power requirement before running power for your machine.

    † Air consumption on 40-taper DC Series machines may be higher, when Through-Tool Air Blast (TAB) is activated.

     

    AVAILABLE OPTIONS

    TECHNICAL DOCUMENTS

    VIDEOS

    RELATED PRODUCTS

    Need help finding the right machine?

    Build & Price

    Let us help you find the right one for your shop.

    Get Started

    Need More Information?

    If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.

    All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.