DOWNLOAD AN INSTANT CUSTOM QUOTE FOR ANY HAAS MACHINE

Belt-Type Chip Conveyor HMC

Automatically remove chips from the machine

Overview
Details
Send Info

This heavy-duty steel, belt-type chip conveyor removes chips from the machine quickly, and discharges them at standard 55-gallon barrel height, with minimal coolant carryout. It is ideal for high-production machining applications, or when machining hard or abrasive materials. The conveyor can be activated via M-code, or directly from the control pendant, and there are settings to control the interval and duration of the conveyor cycle for automatic operation. Smart-sensing technology automatically reverses the conveyor if a jam occurs.

NOTE: For aluminum machining applications that generate large quantities of smaller chips, we highly recommend our CDF Conveyor.

Heavy-duty steel belt-type chip conveyor
Activated via M-code, or from the control pendant
User settings to control cycle interval and duration for automatic operation
Automatic reversal upon torque overload situations

Chip Conveyor

Our belt-style chip conveyor automatically removes chips from the machine, while discharging them at standard barrel height. The chip chute’s steep lift angle minimizes coolant carryout.

Automatically reverses if a jam occurs
Activated via M-code, or from the control pendant
Settings control the interval and duration of operation
Automatic operation increases energy efficiency
Lift angle minimizes coolant carryout
Discharges at standard barrel height

Settings That Control Automatic Conveyor Operation

Setting 114 CONVEYOR CYCLE controls the interval at which the belt-style conveyor will start automatic operation during a cycle.
Setting 115 CONVEYOR ON-TIME controls the duration the belt-style conveyor) will run during automatic operation.
Setting 196 CONVEYOR SHUTOFF specifies the amount of time to wait without activity prior to stopping the conveyor.

NOTE: The operator doors must be closed to operate the belt-style conveyor.

Program Conveyor Operation

M31 starts the belt-style conveyor in the forward direction to remove chips.
- Once started, and the machine is in cycle, the conveyor will run for the time specified in Setting 115 CONVEYOR ON-TIME, and then shut off.
- Once started, and the machine is in cycle, the conveyor will restart after the time in Setting 114 CONVEYOR CYCLE, and run for the time specified in Setting 115.
- While the machine is in cycle, you can start the conveyor by pressing the [CHIP FWD] button on the keyboard. Once started, Settings 114 and 115 have the same effect as described above.
- If Setting 114 is set to zero, automatic auger operation will not occur.
M33 stops all automatic conveyor operation while in cycle.
- Manually stop the conveyor while in cycle by pressing the [CHIP STOP] button on the keyboard. This stops all automatic conveyor operation while in cycle.

Manual Operation

Press the [CHIP FWD] button on the keyboard to start the belt-style conveyor in the forward direction to remove chips.

Press the [CHIP REV] button on the keyboard to start the auger belt-style conveyor in the reverse direction to clear a jam.

Press the [CHIP STOP] button on the keyboard to stop the belt-style conveyor.

Need More Information?

If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.

Belt-Type Chip Conveyor - Option Spotlight

Spend your time making chips, not cleaning them out of your machine. Our belt-type chip conveyor automatically removes chips from your machine, and discharges them at the height of a standard industrial barrel, with minimal coolant carryout. The belt-type chip conveyor can be turned on easily through your program, or straight from the control panel.

All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.